Physics calculator

Overhang Span and Midspan Point Load Calculator

Deflection at a stated station on the span of an overhanging beam with listed span actions. The check station is the sum of already-landed pages. Runs locally.

Instant result

Result

—

Enter values to calculate.

Inputs—

Mode—

Formula—

Trust summary Engine tested · Source checked · v1.0.0

Input interpretation: Enter values to calculate.
Result: —
Model: Deflection at a stated station for this overhang-span superposition.
Scope: Calculation runs locally in the browser; values are not uploaded.
Verification: Engine tested · Source checked · v1.0.0
Named expert review: Optional · Not performed
Sources: Hibbeler, Mechanics of Materials — Deflection of beams — superposition
Gere and Goodno, Mechanics of Materials — Deflection of beams — superposition
Sources

Formulas

Core equations used by this calculator.

Deflection at xδ = δ_overhang(x) + δ_span(x)

iThe check station recovers -12 + 8.

How to use

1

Enter the loads, the station, the overhang, the span, the modulus, and the area moment

x must lie strictly between the supports.

2

Read the deflection

A downward overhang load lifts the span; span loads keep their usual signs.

Example calculations

Common configurations with formula and result.

ϟ

Check station

P = 48, Pm = 48, a = 1, x = 1, L = 2, E = 1, I = 1

δ = δ_overhang(x) + δ_span(x)

δ = -4

Overhang Span and Midspan Point Load calculator specification

Version 1.0.0 · Engine tested

Calculation status

Engine tested 2 published cases
Named expert review Not performed
Calculation version 1.0.0

Definition: A beam of span L has an overhang a beyond the right support, with load P at the overhang end, plus the listed span actions. Deflection at x on the span is the sum of those elastic curves.
What it calculates: Deflection at a stated station for this overhang-span superposition.
Inputs: P
Pm
a
x
L
E
I
Outputs: delta
Formula: Sum of the component curves.
Assumptions: Calculation runs locally in the browser; values are not uploaded.
Keep units consistent with the labels on each field.
The check station recovers -12 + 8.
Units: The inputs set the deflection unit.
Boundary conditions: a required input missing → MISSING_REQUIRED_INPUT
L ≤ 0, E ≤ 0, or I ≤ 0 → VALUE_MUST_BE_POSITIVE
x out of range → INVALID_INPUT
Example: P = 48, Pm = 48, a = 1, x = 1, L = 2, E = 1, I = 1 → δ=-4
Validation cases: 2 published on this page
P = 48, Pm = 48, a = 1, x = 1, L = 2, E = 1, I = 1 → δ=-4
x out of range → INVALID_INPUT
Sources: Hibbeler, Mechanics of Materials — Deflection of beams — superposition
Supports: The listed actions superpose.
Gere and Goodno, Mechanics of Materials — Deflection of beams — superposition
Supports: Supports adding the elastic curves.
Calculation version: 1.0.0

Background

Interpretation and common distinctions.

Find the deflection at a stated station for this superposition.

Agent / API notes

Capability id: mechanical.statics.overhang_span_point_at_deflection · tool id: overhang-span-point-at · pin 1.0.0.

{
  "P": 48,
  "Pm": 48,
  "a": 1,
  "x": 1,
  "L": 2,
  "E": 1,
  "I": 1
}

Other calculators in this family: Overhang span .

Frequently asked questions

Key distinctions behind the calculation.

Does the check station match the landed pages?

Yes. It gives δ = -12 + 8 = -4.